CressPure
The CressPure Lab Report
CressPure Premium Atta was tested by AQC Labs, Indore, a NABL accredited laboratory operating to ISO 17025. Other edible grains: none found, against a permitted limit of 6%. Pesticides: 94 screened, none detected. Heavy metals and aflatoxin: not detected. Moisture 11.46%, against a limit of 14%. The full report is linked at the bottom of this page.
What was tested, and what came back
| What was checked | Result | Limit or reference |
|---|---|---|
| Other edible grains | None found | 6% permitted |
| Pesticide residues | None detected | 94 residues screened |
| Lead, arsenic, cadmium, mercury | Not detected | Heavy metals screen |
| Aflatoxin | Not detected | Mycotoxin screen |
| Moisture | 11.46% | 14% maximum |
What is in 100 grams
| Per 100 g | Amount |
|---|---|
| Energy | 354.7 kcal |
| Protein | 11.7 g |
| Dietary fibre | 10.3 g |
| Carbohydrate | 73.6 g |
| Total fat | 1.5 g |
| Total sugar | 1.6 g |
| Added sugar | 0 g |
| Trans fat | Not detected |
| Sodium | 19.2 mg |
These are the figures printed on the pack. Nothing rounded up, nothing left out. What the numbers actually mean is covered separately.
Who tested it
AQC Labs, Indore. NABL accredited, operating to ISO 17025. Report numbers AQC/2526/03/05/49180 and AQC/2526/03/05/49206, issued to our milling partner, Rajlakshmi Javiks International.
The laboratory is independent of CressPure and of the mill. We do not choose the results and we do not choose which of them to publish.
Why the other grains number matters most
An atta can legally contain up to 6% of grains other than the one on the front of the pack. That is not a loophole, it is a practical allowance, because most mills buy what the market offers in a given week and even it out. Ours is one wheat variety, bought as a single wheat, so there is nothing else to find. The report says so rather than us.
How to read a report like this yourself
You do not have to take our reading of it. How to read a lab test report for atta and wheat walks through what each section means, what a detection limit is, and which numbers are worth your attention on any report, from any brand.
Frequently asked
Does every batch get tested?
A sealed sample goes to the laboratory before a batch is listed for sale. The batch number printed on your pack ties it to a specific mill run.
Why publish the report at all?
Because a claim on a pack is a claim, and a report is evidence. If we are asking for more than the atta beside us on the shelf, the burden is ours.
Where do I find the batch number?
Printed on the pack alongside the packing date. Eight things worth checking on any atta pack shows where to look.
The full report
Open the complete laboratory report as a PDF. If anything in it does not match what is on this page, the report is the one that counts, and we would like to know: info@cresspure.com.